广东广州工业和信息化部电子第五研究所相位噪声测试系统及示波器采购项目-公开招标公告

项目编号
点击查看
预算金额
点击查看
招标单位
点击查看
招标电话
点击查看
代理机构
点击查看
代理电话
点击查看

查看隐藏内容(*)需先登录

工业和信息化部电子第五研究所相位噪声测试系统及示波器采购项目 - 国际招标公告 ******受招标人委托对下列产品及服务进行国际公开竞争性招标,于****-**-**在中国国际招标网公告。本次招标采用传统招标方式,现邀请合格投标人参加投标。*、招标条件项目概况:本次招标货物包含相位噪声测试系统*套及示波器*套。招标设备的整体安装、调试、试运行、验收和质保期服务等服务内容在内的一揽子项目。该项目为交钥匙项目。资金到位或资金来源落实情况:资金已落实。项目已具备招标条件的说明:项目已审批。*、招标内容招标项目编号:****-****GZI*****招标项目名称:工业和信息化部电子第五研究所相位噪声测试系统及示波器采购项目项目实施地点:中国广东省招标产品列表(主要设备): 序号 产品名称 数量 简要技术规格 备注 * 相位噪声测试系统 * 频率范围:**kHz~**GHz 频偏范围:*.**Hz~***MHz 残余相位噪声≤-***dBc/Hz@**kHz 相位噪声测量准确度:±*dB(*.*MHz offsets);±*dB(***.*MHz offsets) 支持外部参考源,进行原子钟等高性能频率源测试以及普通频率源和系统相位噪声系统 无 * 示波器 * 带宽:至少*个电通道≥** GHz,其他≥**GHz;*通道(其中电通道数≥*个,光通道数≥*); 等效采样率:**GS/s 本底噪声:**mV/格时,*.**mV 固有抖动***fs rms 无 *、投标人资格要求投标人应具备的资格或业绩:* *)如果投标人按照合同提供的货物不是投标人自己制造的,投标人应提供制造厂商或制造厂商授权代理商针对本项目的授权书的正式授权书(格式见《机电产品采购国际竞争性招标文件》(第一册));* *)投标人须提供其开户银行在开标日前三个月内开具的资信证明原件或该原件的复印件(如资信证明中明确注明复印无效的则必须提供该资信证明原件,招标机构保留审核原件的权利);* *)其他资格证明文件:①投标人营业执照或企业注册证明复印件;②外贸合同签约卖方原则上必须是原厂商或其代理商。若投标人为原厂的中国区代理商,且在外贸合同中以原厂的中国区代理商身份作为卖方,还应出具相应的销售资质证明;③非中国境内的设备制造商或其代理商需******或者办事机构,提供服务保证。(提供售后服务条款,售后服务机构地址)是否接受联合体投标:不接受未领购招标文件是否可以参加投标:不可以*、招标文件的获取招标文件领购开始时间:****-**-**招标文件领购结束时间:****-**-**是否在线售卖标书:否获取招标文件方式:现场领购招标文件领购地点:中招联合招标采购平台(网址:***.******.***.cn)招标文件售价:¥***/$**其他说明:供应商******网站“中招联合电子招标平台供应商在线服务”(***.******.***.cn/)购买招标文件。平台操作相关问题请查询网站“通知公告”栏目(***.******.***.cn/announce/)中《供应******(*********-********转*、***-********;QQ:**********)。本公司只接受通过以上方式正式获取招标文件的供应商参加投标。*、投标文件的递交投标截止时间(开标时间):****-**-** **:**投标文件送达地点:广州市越秀区广仁路*号广仁大厦*楼会议室开标地点:广州市越秀区广仁路*号广仁大厦*楼会议室*、联系方式招标人:工业和信息化部电子第五研究所地址:广州市增城区朱村街朱村大道西**号联系人:李工联系方式:***-********招标代理机构:******地址:广州市越秀区广仁路*号广仁大厦*楼联系人:宋工联系方式:***-********转***(******)*、汇款方式:招标代理机构开户银行(人民币):/招标代理机构开户银行(美元):/账号(人民币):账号(美元):*、其他补充说明其他补充说明:投标人在投标前应在必联网(***.******.***)或机电产品招标投标电子交易平台(***.******.***)完成注册及信息核验。评标结果将在必联网和中国国际招标网公示。 Phase noise test system and oscilloscope procurement project of the Fifth Research Institute of Electronics of the Ministry of Industry and Information Technology Guangdong Hualun Tendering Co., Ltd. entrusted by the purchaser, invites sealed bids from eligible suppliers home and abroad for the supply of the following goods and/or service by way of International Competitive Bidding. The tender notice was released on ***.******.*** on****-**-***、Bidding ConditionsOverview:The bidding goods include * set of phase noise testing system and * set of oscilloscope. A package project that includes overall installation, commissioning, trial operation, acceptance, and warranty services for the bidding equipment. This project is a turnkey project.Source of Funds:The funds have been secured.Description of The Prepared Bidding Conditions:The project has been approved.*、Bidding ContentBidding No:****-****GZI*****Project Name:Phase noise test system and oscilloscope procurement project of the Fifth Research Institute of Electronics of the Ministry of Industry and Information TechnologyPlace of Implementation:GuangzhouList of Products: NO. Product Name Quantity Main Technical Data Remarks * phase noise measurement system * Frequency range: **kHz to **GHz Frequency offset range: *.**Hz to ***MHz Residual phase noise ≤ -***dBc/ Hz@**kHz Phase noise measurement accuracy: ± *dB (*.*MHz offsets); ±*dB(***.*MHz offsets) Support external reference sources for testing high-performance frequency sources such as atomic clocks, as well as ordinary frequency sources and system phase noise systems n/a * oscilloscope * Bandwidth: at least * electrical channel ≥ ** GHz, others ≥ ** GHz; * channels (including at least * electrical channels and at least * optical channel); Equivalent sampling rate: **GS/s Background noise: *.**mV at **mV/grid Inherent jitter ***fs rms n/a *、Qualification Requirements For BidderQualifications or Performance:*If the goods provided by the bidder according to the contract are not manufactured by the bidder itself, the bidder shall provide a formal authorization letter from the manufacturer or authorized agent of the manufacturer for this project (see the format in the "International Competitive Bidding Documents for Procurement of Mechanical and Electrical Products" (Volume *));**) Bidders must provide the original or a copy of the credit certificate issued by their bank within three months before the bid opening date (if the credit certificate clearly states that the copy is invalid, the original credit certificate must be provided, and the bidding agency reserves the right to review the original);**) Other qualification certification documents:① Copy of the bidder's business license or enterprise registration certificate;② In principle, the seller signing a foreign trade contract must be the original manufacturer or its agent. If the bidder is the Chinese agent of the original factory and acts as the seller in the foreign trade contract as the Chinese agent of the original factory, they should also provide corresponding sales qualification certificates;③ Equipment manufacturers or their agents outside China shall prove that they have branches or offices in Chinese Mainland to provide service guarantee. (Provide after-sales service terms and address of after-sales service agency)Joint Bids:NOT AvailableBid without the bidding documents:NOT Available*、Acquisition of Bidding DocumentsBeginning of Selling Bidding Documents:****-**-**Ending of Selling Bidding Documents:****-**-**Sell biddingdoconlineornot:NoTo Obtain::On-site PurchasePlace:***.******.***.cnPrice of Bidding Documents:¥***/$**Additional Instructions:Suppliers can log in to our company's website "Online Service for Suppliers on the Zhongzhao Joint Electronic Tendering Platform" within the above-mentioned dates( ***.******.***.cn/ )Purchase bidding documents. For platform operation related issues, please refer to the "Notice and Announcement" section of the website( ***.******.***.cn/announce/ )Please refer to the "Supplier Operation Guide" or consult our company (or consult our company at ***-********, ***-********; QQ: **********). Our company only accepts suppliers who have officially obtained the bidding documents through the above methods to participate in bidding.*、Bid SubmissionDeadline for Submitting Bids/Time of Bid Opening (Beijing Time):****-**-** **:**Place of Bid:Meeting Room, *th Floor, Guangren Building, No.* Guangren Road, Yuexiu District, Guangzhou CityPlace of Bid Opening:Meeting Room, *th Floor, Guangren Building, No.* Guangren Road, Yuexiu District, Guangzhou City*、Contact DetailsPurchasers:CEPREIAdd.:No. ** Zhucun Avenue West, Zhucun Street, Zengcheng District, Guangzhou CityContact:Mr.LeeTel:***-********Bidding Agency:Guangdong Hualun Tendering Co., Ltd.Add.:*th Floor, Guangren Building, No.* Guangren Road, Yuexiu District, Guangzhou CityContact:Ms.SongTel:***-********-***(******)*、Remittance Approach:Bank(RMB):Bank(USD):Account NO.(RMB):Account NO.(USD):*、Additional InstructionAdditional Instructions:Bidders should connect to the internet before bidding( ***.******.*** )Or electronic trading platform for bidding and tendering of mechanical and electrical products( ***.******.*** )Complete registration and information verification. The evaluation results will be publicly announced on the Bilibili and China International Tendering Network. ***************************
查看隐藏内容